Python安装Imaging报错:The _imaging C module is not installed问题解决方法

伤心了难过了,一个人静静,不要在任何人面前掉眼泪,我不能原谅我的懦弱。经常笑,学会向比自己小的人称哥,以保持年轻心态。

今天写Python程序上传图片需要用到PIL库,于是到http://www.pythonware.com/products/pil/#pil117下载了一个1.1.7版本的,我用的是CentOS64 并且自行升级后的Python版本安装PIL库
首先下载解压:


[root@lee ~]# wget http://www.pythonware.com/products/pil/#pil117
[root@lee ~]# tar -xf Imaging-1.1.7.tar.gz

然后准备安装

[root@lee ~]# cd Imaging-1.1.7
[root@lee Imaging-1.1.7]# python python setup.py build_ext -i

都没问题,当测试安装的时候却老提示:*** The _imaging C module is not installed

[root@lee Imaging-1.1.7]# python selftest.py
*** The _imaging C module is not installed

找了半天,也找不出是什么原因,后来终于在官网从一堆英文中找到了关键所在,解决方法,实际根据自己的python PIL路径设置

[root@lee Imaging-1.1.7]# echo '/usr/local/lib/python2.7/site-packages/PIL' >> /etc/ld.so.conf
[root@lee Imaging-1.1.7]# ldconfig

重新python selftest.py,一路安装完成

以上就是Python安装Imaging报错:The _imaging C module is not installed问题解决方法。抱最大的但愿,为最大的努力,做最坏的打算。更多关于Python安装Imaging报错:The _imaging C module is not installed问题解决方法请关注haodaima.com其它相关文章!

您可能有感兴趣的文章
Python自动化运维-使用Python脚本监控华为AR路由器关键路由变化

Python自动化运维-netmiko模块设备自动发现

Python自动化运维—netmiko模块连接并配置华为交换机

Python自动化运维-利用Python-netmiko模块备份设备配置

Python3内置模块之json编码解码方法详解